Additive for blow molding
Hàng của người sản xuất
Có sẵn
Chỉ định giá từ người bán
- Customer pickup,
- Courier
- Chi tiết
Đặc tính kỹ thuật
- Thương hiệuCALMAST
- Sản xuất tạiViệt Nam
Mô tả
ALMAST is a compound of polymer resin, additives and Calcium carbonate (CaCO3) base, in which containing 70-83% of CaCO3 and 17-30% PP,PE resin with some other additives.
CALMAST is good fitness, dispersion used by mixing with virgin or recycled resin. Adding ration ranges from 5% to 40% by weight depending on the specific product and it is adjusted based on specific production and technology conditions.
APPLICATIONS:
* Technologies: Blow moulding, Injection molding,Extrusion...
* CALMAST is used for blow palstic bottle ( water bottle, baby bottle..), shampoo, can, extrusion HDPE tube, blowing polyethylene bags, bag on roll, bulk bag, poly film, poly sheet...
�
ADVANTAGES :
- Improvement of dimensional stability, ESCR.
- Due to high thermal conductivity of calcium carbonate polymer melt is hit and cooled faster, extrusion or injection cycle is reduce, output is increased.
- Cost reduction of the finished products due to lower consumption quantity of the virgin.
- Improvement of final products characteristics (its nature of machanical and physicochemical properties should be better).
- When finished products are of white color or of light shades, it is possible to reduce adding ratio of white color pigment (TiO2 masterbatch) thus reducing composition cost;
- Improvement of printability on finished product's surface.
- No toxic, safety for health and environment.
Contact the seller
Additive for blow molding
We recommend to see